Many vehicles are now coming standard with factory navigation, but unfortunately some key features that drivers are used to are not supported. For example, safety cameras, speed alerts, school zones, GPS speed and much more. Navigation updates can also be very expensive. So rather than investing in updates, it can be more beneficial long term to add a more up to date and better featured after market navigation system instead.
The LandCruiser 200 Series Sahara has a beautiful high resolution 8 inch display and our Advanced ICE Integrated Navigation system adds full iGO primo NextGen Navigation into the factory screen. A simple long-press the “Nav Button” will allow complete control of the iGO Street mapping directly through the existing touch screen in the vehicle.
If you tow a caravan this system includes the functionality of the 1409-1, so why not use the existing large screen as a rear view mirror by connecting a Caravan/Trailer camera as well.
Get a quick installation quote
Call 1300 020 385 for an instant quote (during business hours), or use the contact form below.
- Full Australia & New Zealand iGO primo NextGen Navigation with Here Maps
- 16GB Industrial SD Card
- High Definition (HDMI) Navigation Computer
- 12 months free Street Mapping updates
- Activation of Navigation by long press of Nav button
- Compatible with factory fitted Reverse Camera
- 2 year hardware warranty*
- Set your vehicle specifications (size, width, length, towing and more) and the navigation will navigate you accordingly, avoiding potential hazards like low bridges.
- Advanced Road Warning signs gives you early warning of road signs that will allow you to prepare for the roads ahead with more advanced warning.
- Camps & Caravan Parks Australia Wide and Dump Point POI’s are pre installed.
- Additional video input for Front/Caravan Camera
- Intelligent Search Function, Points of Interest Database, Enhanced Junction View and Real Signpost Rendering
Note* 1 year warranty on SD Card
Compatible with the Following Vehicles:
- LandCruiser 200 Series Sahara from 2012 – 2015 with 8 Inch EMV Screen.
– If you have a VX or Sahara model (from late 2015) that has the 9 Inch Screen, please see part number NAV-LC2-P1.
Q: How is the system activated?
A: Switching to the iGO primo NextGen navigation is simple, just long press the “NAV” button on the factory system.
Q: How do I perform Street Navigation updates?
A: Map updates are easily performed with a Windows PC. The navigation computer will be mounted in an easy to access location. Instructions can be found under the downloads tab.
Q: What warranty does this system come with?
A: The hardware of your system comes with a 2 year warranty except for the SD card, which has a 12 month warranty.
Q: Does it interfere with any factory features?
A: No, all other functionality will remain the same.
Q: Do the navigation commands come through the factory speakers?
A: Due to the complexity of the audio system in this vehicle this is currently not possible. Voice commands and alerts will be made via a separate speaker and they will not automatically mute when on a phone call.
Q: Will navigation directions display in the information screen in the vehicles cluster?
A: The factory navigation system is still operational so this will continue to display as normal. Navigation directions from this product will not display in the information screen in the cluster.
Q: Is this a simple software upgrade of the unit or is it a whole new Radio system?
A: This system is not a software upgrade or replacement Navigation card, it comprises of two new hardware items, a Multimedia Interface and a Navigation Computer. These parts allow us to integrate to the factory installed system so we are not removing or replacing your factory installed system.
Q: What Point of Interest information is available?
A: The navigation system comes with over 750,000 points of interest built in, which includes petrol stations, restaurants, accommodation, parks and many more. In addition, the Premium System comes pre installed with over 4000 sites from Camps Australia Wide including Caravan Parks Australia Wide and Dump Points.
Q: Does this system have Live Traffic Information?
A: No. This system does not have any Live Traffic information.
Q: What sort of voice guidance does the system have?
A: There are 3 options for voice guidance. A “TTS” (Text-To-Speech) voice will give you the most information and will announce street names, etc. A non-TTS voice will announce directions, but will not announce things like street names. Lastly, you can set the system to have no voice guidance by muting the voice. This is done by pressing the “Menu” button and then selecting the small “Speaker” icon that appears along the bottom.
Q: Do I need my mobile phone to be navigated?
A: No. This system is completely independent of any phone and it relies solely on GPS signal for navigation. It is a 100% offline navigation solution.
Q: Why is my GPS time wrong?
A: This is likely just a setting in your navigation. In the “Settings” menu, select “Regional”. Here you will be able to adjust whether the navigation system bases the time on your location or whether you want to set it manually (eg. GMT +10 for AEST). If your time is 1 hour out, there is also the setting for Daylight Saving Time which can be found here and adjusted if necessary.
Q: How can I change the voice?
A: Go to “Menu”, page across to “Settings”. Select “Regional” and then go in to “Voice Language” and change to your preferred option.
Q: Why are the speed limits or streets wrong (even though they have been the same for many years)?
A: It is a very difficult process to map with 100% accuracy and the map provider does make use of end user information. Sometimes things change (eg. changed speed limit), sometimes the data is incorrect. Please ensure that you have updated your navigation to ensure you have the latest available map content. If you have the latest maps available and the information is still incorrect please google “here map error” and look for their “Map Creator”. Click on the “Feedback” button down the bottom to report an error.
Q: Is this system compatible with my existing Caravan’s Camera?
A: Our system is compatible with most Caravan Camera brands on the market and can have either a NTSC or PAL video signal format. Some popular brands are Safety Dave, Polaris and Dometic. Unfortunately it is not possible to connect an AHD camera to our system.
Please see the next question for connection requirements
Q: Will my Caravan Camera cable need an adapter?
A: Our systems have a Female RCA connection for the caravan camera (see below image #1). Most Caravan Cameras will have a multi-pin plug so an adapter from this connection to a Male RCA is normally required. An example is below in image #2. If you are unsure, please feel free to get in touch with us, send us a picture and we will be able to advise what you will need.
Q: When I go into reverse, it shows a black screen, is there something wrong?
A: Usually a black screen in shown when the Caravan Camera has been activated, but the Caravan has been disconnected from the vehicle – that’s why it’s not showing any image on the screen.
To change back to the Reverse Camera image:
> Put your vehicle into Reverse
> Hold down the NAV button on your radio until the factory display shows up
> Put your vehicle into Park
> Put your vehicle back into Reverse
This product comes with a 2 Year* return to base warranty against manufacturing defects. For all technical support or to make a warranty claim, contact the company/business that supplied/installed the product for you. Advanced ICE Pty Ltd is not liable for any remove or refit charges incurred. If the product fails within 30 days of purchase or installation, the product will be replaced or exchanged provided sufficient proof can be provided via picture or video that the fault/problem is as a result of a manufacturing defect. If the product fails after 30 days, the product should be returned to Advanced ICE Pty Ltd and it will be repaired or replaced once confirmation is made that the fault/problem is because of a manufacturing defect. This warranty does not cover faults related to user error, damage or incorrect installation.
*If this product contains a Navigation SD card this is limited to a 1 year warranty and subject to inspection.
Please contact the company/business that installed the product for you and arrange a time to have the product inspected. If you do not know this information or you are experiencing problems making the warranty claim, please log a support case by emailing Advanced ICE Pty Ltd directly on the below email address. Before emailing, please ensure you have a copy of the Proof of purchase, the products serial number (if product is serialised) and the product has been registered on the Advanced ICE website.
Warranty Terms & Conditions
1 – This warranty document supersedes all other warranty information that may be listed on the Manufacturers website or in provided manuals or documentation.
2 – The end user agrees to use this product in compliance with all State and Federal laws. Advanced ICE Pty Ltd, the manufacturer or the seller will not be held liable for misuse of this product. If you do not agree, please do not purchase or install this product.
3 – We reserve the right to carry out technical changes to improve products at any time. Advanced ICE Pty Ltd does not guarantee that products can be updated with new features or software enhancements. If software updates are available, the product must be sent in at own cost. Advanced ICE Pty Ltd will not cover the labour cost for the removal and refitting of the product and other expenses involved with the software-updates.
4 – If the product is connected to or utilises the functionality or connectivity of other accessories or devices (ie Mobile Phone), Advanced ICE Pty Ltd does not guarantee the product will be compatible with future software updates of the device or new devices.
5 – Advanced ICE Pty Ltd does not guarantee that this product can be transferred to another vehicle, even though it may be a similar make and model.
6 – Advanced ICE Pty Ltd does not guarantee this product against future vehicle updates or warranty repairs (hardware or software) performed by the vehicle manufacturer.
7 – Please check with the vehicles manufacturer if installation of aftermarket products will affect the vehicles warranty before purchasing and/or installing this product. Advanced ICE Pty Ltd assumes no liability.
8 – Removal and refit charges related to any warranty claim are at the discretion of the seller of the product. If another seller is used for removal and refit of any warranty claim this will be payable by the end user.
9 – Technical support for software updates that can be performed by the user are not covered under warranty and a service charge will apply.
What’s Not Covered
A warranty claim will be rejected if:-
1 – Unauthorised changes or modifications have been made to the device or accessories.
2 – The device’s case, accessories, “Warranty Seals” or stickers have been damaged, opened and/or tampered with.
3 – Attempted unauthorised repairs to a product and/or accessories.
4 – Improper use or operation.
5 – Loading of unauthorised or incompatible software.
6 – Problems that relate to the installation of additional products or accessories not supplied by Advanced ICE Pty Ltd.
7 – Navigation SD Card has been tampered with or has had unauthorised or incompatible maps or files added.
Navigation Map Updates
1 – Navigation software is designed to get you to a certain destination, however, due to regular changes to the national road network, accuracy of the provided data is not guaranteed. Please ensure your device is updated regularly.
2 – Navigation updates are the responsibility of the end user and performing these updates requires a Windows PC and an internet connection. Apple Mac computers are not currently supported. If you require assistance with the updates a service charge will apply.
3 – Future map updates are purchased directly from the map provider and Advanced ICE Pty Ltd does not offer any warranty or support for these purchases.
Advanced ICE Pty Ltd recommends that you read our website and watch any videos if available before purchasing to ensure that the features and functions of the product are suitable for your requirements. If you are not sure, please contact an authorised re seller or our sales and technical support team for further assistance before purchasing the product.
Change of Mind (Pre Installation) – Products can be returned within 14 days of purchase provided it is in Brand New unopened condition. Products must be returned to the place of purchase, they should not be returned directly to Advanced ICE if the product was purchased through a re seller. All Freight charges are at the buyer’s expense and a 10% fee will be charged to cover handling and restocking. A refund will only be issued once the product has been examined and confirmed to be in new condition.